Consumíveis Laser
Bistronic
Periféricos
Nº Peça
Referência
Descrição
HG10.437
4-03136
Knurled Screw
HG10.438
4-00324
Knurled Screw
HG10.439
4-03137
PIn
HG10.474
3-02291
Nozzle Body
HG10.433
4-01642
Insulating Ring – Ceramic
HG10.432
3-05497
Nozzle Body
HG10.434
4-01959
Conical Ceramic
HG10.471
2-08701
Nozzle Body
HG10.473
3-11071
Fastener Nut
HG10.470
4-09010
Ceramic
HG10.472
2-08700
Shield (copper)
HG10.493
3-13113
Insulating Ring (small)
HG10.495
2-10837
Nozzle Body
HG10.488
10032930
Nozzle Body
HG10.494
3-13422
Insulating Ring (large)
HG10.440
3-06035
Insulating Disc (PTFE)
HG10.496
10055576
Nozzle Holder BySprint™
HG10.403
3-01894
Nozzle 1.0mm – 10
HG10.404
3-01895
Nozzle 1.25mm – 12
HG10.405
3-01896
Nozzle 1.50mm – 15
HG10.408
3-01899
Nozzle 1.00mm – H10
HG10.409
3-01900
Nozzle 1.25mm – H12
HG10.410
3-01901
Nozzle 1.50mm – H15
HG10.411
3-01902
Nozzle 1.75mm – H17
HG10.412
3-01903
Nozzle 2.0mm – H20
HG10.413
3-01905
Nozzle 1.0mm – K10
HG10.414
3-01906
Nozzle 1.25mm – K12
HG10.415
3-01907
Nozzle 1.50mm – K15
HG10.416
3-01908
Nozzle 1.75mm – K17
HG10.417
3-01909
Nozzle 2.00mm – K20
HG10.426
3-04274
Nozzle 2.25mm – K25
HG10.418
3-01910
Nozzle 1.00mm – HK10
HG10.418/C
3-01910CP
Nozzle 1.00mm – HK10 – HCP
HG10.419
3-01911
Nozzle 1.25mm – HK12
HG10.419/C
3-01911CP
Nozzle 1.25mm – HK12 – HCP
HG10.420
3-01912
Nozzle 1.50mm – HK15
HG10.420/C
3-01912CP
Nozzle 1.50mm – HK15 – HCP
HG10.421
3-01913
Nozzle 1.75mm – HK17
HG10.421/C
3-01913CP
Nozzle 1.75mm – HK17 – HCP
HG10.422
3-01914
Nozzle 2.0mm – HK20
HG10.422/C
3-01914CP
Nozzle 2.0mm – HK20 – HCP
HG10.423
3-03854
Nozzle 2.5mm – HK25
HG10.425
3-06112
Nozzle 3.0mm – HK30
HG10.424
HG10.424
Nozzle 3.50mm – HK35
HG10.731/H
4-00186
5.00“ ZnSe Meniscus lens
High pressure lens (20bar), 38.1mm
Effective focal length: 127.0mm
Edge thickness: 6.0mm
AR/AR for 10.6µm (absorption <0.20%)
HG10.732/H
4-00187
7.50“ ZnSe Meniscus lens
High pressure lens (20bar), 38.1mm
Effective focal length: 190.5mm
Edge thickness: 6.0mm
AR/AR for 10.6µm (absorption <0.20%)
HG10.729/H
4-10736
3.75“ ZnSe Meniscus lens
High pressure lens (42bar), 38.1mm
Effective focal length: 95.3mm
Edge thickness: 9.0mm
AR/AR for 10.6µm (absorption <0.20%)
HG10.733/H
4-05094
5.00“ ZnSe Meniscus lens
High pressure lens (42bar), 38.1mm
Effective focal length: 127.0mm
Edge thickness: 9.0mm
AR/AR for 10.6µm (absorption <0.20%)
HG10.734/H
4-05095
7.50“ ZnSe Meniscus lens
High pressure lens (42bar), 38.1mm
Effective focal length: 190.5mm
Edge thickness: 9.0mm
AR/AR for 10.6µm (absorption <0.20%)
HG10.733/HU
4-07475
5.00“ ZnSe Meniscus lens – ULTRA LOW
High pressure lens (42bar), 38.1mm
Effective focal length: 127.0mm
Edge thickness: 9.0mm
AR/AR for 10.6µm (absorption <0.13%)
HG10.734/HU
4-07476
7.50“ ZnSe Meniscus lens – ULTRA LOW
High pressure lens (42bar), 38.1mm
Effective focal length: 190.5mm
Edge thickness: 9.0mm
AR/AR for 10.6µm (absorption <0.13%)
HG17.517
10045746
Protection Window D36.00mm × ET = 5.0mm
HG10.174
HG10.174
Polish for laser optics, 250ml, 0367432/2243066
HG10.173
HG10.173
Lens cleaning paper from TIFFEN®, sheet size 70 × 115mm
HG15.136
HG15.136
Latex gloves
HG10.176
HG10.176
Air filter for cooling aggregate
size: 800 × 600 × 8mm
* FULLY INTERCHANGEABLE WITH ORIGINAL PARTS, BUT DIFFERS FROM ORIGINAL DESIGN ** A UNIQUE DESIGN WHICH ENHANCES PERFORMANCE AND DIFFERS FROM OEM DESIGNS a, b, c, d. – This symbols always point to the part/s which must be used only as a set with another pointed part/s. O.D.– ON DEMAND – We do not keep these parts in stock, cost is set according to the ordered quantity, delivery time may differ from standard products. (i)/(ii) – Information about limited distributing of marked part on specific market. ! – Ohmic contact wire is not part of the cable leads. !!! – Demo is inoperative, for exhibition purposes only! NS NOT SHOWN IN THE PICTURE
Não encontrou o que procura?
Preencha o formulário que se segue e faça-nos chegar as suas dúvidas, a nossa equipa entrará em contacto consigo o mais rapidamente possível.
